FreeBSD / NetBSD DHCP setting

When FreeBSD / NetBSD fresh install , the NIC is not enable dhcp in default, it’s different then other linux like system(config interface during installation).

so, how to enable ehcp clinet for the interface?

vi /etc/rc.conf
add or modify
dhcpcd=YES
dhcpcd=”wm0″
save ans exit

dhcpcd start

ifconfig check the setting.
(dhcpcd the last c means client.)
============
DHCP Server

vi /etc/dhcpd.conf
# Setting DHCPD global parameters
allow unknown-clients;

# Set parameters for the 192.168.0.0/24 subnet.
subnet 192.168.0.0 netmask 255.255.255.0 {
range 192.168.0.2 192.168.0.8; <=== Range of IP addresses
available for assignment.
default-lease-time 604800; <=== Default lease time in
seconds. This is the time
assigned if the client doesn’t
request one.
max-lease-time 604800; <=== Maximum time a lease will be
given.
option subnet-mask 255.255.255.0; <=== subnetmask given to clients
option domain-name-servers 1.2.3.4, 1.2.3.5; <=== put a list of name server IP
addresses here.
option domain-name “your.domain.name”;
option routers 192.168.0.1; <=== list of routers the clients should
use
}

save and exit;
vi /etc/rc.conf
add or modify
dhcpd=YES
decpd_flags=”-q ae1″
#dhcp lease interface

touch /var/db/dhcpd.leases
service dhcpd start

reference
1.NetBSD DHCP HOWTO

發佈留言

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *