因為測試和硬碟規劃的關係，所以要重新安裝執行指令如下
mkfs.ext4 /dev/sdb1
出現
/dev/sdb1 is apparently in use by the system; will not make a filesystem here!
(在這之前，已經fdisk移掉所有的磁碟分割區，也重新建立)
找了很多方法都不行，後來查到，應該是之前有建立過lvm的關係
指令如下
dmsetup status
sshd-vm–101–disk–0: 0 3774873600 linear
pve-data_tdata: 0 709582848 linear
pve-data_tmeta: 0 7241728 linear
pve-swap: 0 16777216 linear
pve-root: 0 201326592 linear
pve-data: 0 709582848 thin-pool 0 4503/905216 0/5543616 – rw no_discard_passdown queue_if_no_space – 1024
看到舊的sshd-vm–101–disk–0的記錄，出問題的就是這個地方
進行移掉，指令如下
dmsetup remove sshd-vm–101–disk–0
確認是否正確移除，指令如下
dmsetup status
pve-data_tdata: 0 709582848 linear
pve-data_tmeta: 0 7241728 linear
pve-swap: 0 16777216 linear
pve-root: 0 201326592 linear
pve-data: 0 709582848 thin-pool 0 4503/905216 0/5543616 – rw no_discard_passdown queue_if_no_space – 1024
果真移到了，再來做一次ext4的格式化
mkfs.ext4 /dev/sdb1
mke2fs 1.44.5 (15-Dec-2018)
Creating filesystem with 488378385 4k blocks and 122101760 inodes
Filesystem UUID: fb0a6b20-c04f-43a8-8951-e6f854930d88
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000, 214990848
Allocating group tables: done
Writing inode tables: done
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information:
done
順利完成，再也沒有出現/dev/sdb1 is apparently in use by the system; will not make a filesystem here!的錯誤訊息
如何在Proxmox VE中掛載硬碟，我是參考這一篇
隨機文章
- Docker-Compose for Guacamole (2024-07-24)
- 科賦 KLEVV SSD 送修 一整個爛掉 (2024-10-16)
- P2V 數種方法，手法各有不同 (2016-07-05)
- Delphi再一次親密接觸 (2009-07-18)
- 國泰世華支票出包燒到我~靠北邊走 (2011-03-10)
隨機美圖
